SBT350-04J no.8261-1/3 applications ? high frequency rectification (switching regulators, converters, choppers). features ? guaranteed up to tj=150 c. ? low forward voltage (v f max=0.55v). ? short reverse recovery time. ? low switching noise. ? high reliability due to highly reliable planar structure. ? attachment workability is good by mica-less package. specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit repetitive peak reverse voltage v rrm 40 v nonrepetitive peak reverse surge voltage v rsm 44 v average output current i o 50hz resistive load, sine wave tc=71 c35a surge forward current i fsm 50hz sine wave, 1 cycle 140 a junction temperature tj --55 to +150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit reverse voltage v r i r =5ma, tj=25 c* 40 v forward voltage v f i f =15a, tj=25 c* 0.55 v reverse current i r v r =20v, tj=25 c* 0.5 ma interterminal capacitance c v r =10v, tj=25 c* 800 pf thermal resistance rth(j-c) junction-case : smoothed dc 3.0 c / w note) * : value per element ordering number : enn8261 32505sd ts im tb-00001274 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan SBT350-04J schottky barrier diode (twin type cathode common) 40v, 35a rectifier
SBT350-04J no.8261-2/3 package dimensions electrical connection unit : mm 1178a anode anode cathode 1.6 1.2 0.75 14.0 16.0 10.0 18.1 5.6 3.2 7.2 3.5 2.55 2.55 2.4 4.5 2.8 0.7 2.55 2.55 2.4 1 23 7.2 1 : anode 2 : cathode 3 : anode sanyo : to-220ml 0 1.0 10 100 1.2 0.8 0.4 5 7 2 3 5 7 2 3 5 7 2 3 7 5 2 3 0.01 0.1 it09134 0 10 2 100 5 7 3 5 7 3 2 7 5 3 2 10 20 30 40 50 (3) (1) 0 0 25 30 20 5 10 15 10 545 30 40 35 20 25 15 it09136 (4) (3) (1) 0 0 10 5 4 2 11 14 13 12 8 9 6 3 1 7 50 40 30 20 10 (2) (4) (2) tj=150 c 25 c it09135 it09137 tj=150 c max 150 c typ 125 c typ 100 c typ i f -- v f i r -- v r p f (av) -- i o p r (av) -- v rm forward voltage, v f -- v forward current, i f -- a reverse voltage, v r -- v reverse current, i r -- ma peak reverse voltage, v rm -- v average reverse power dissipation, p r (av) -- w average forward current, i o -- a average forward power dissipation, p f (av) -- w represented by max 180 360 q 360 180 360 v r (1)rectangular wav e q =60 (2)rectangular wav e q =120 (3)rectangular wav e q =180 (4)sine wav e q =180 (1)rectangular wav e q =300 (2)rectangular wav e q =240 (3)rectangular wav e q =180 (4)sine wav e q =180 sine wave sine wave rectangular wave q 360 v r rectangular wave
SBT350-04J no.8261-3/3 ps specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of march, 2005. specifications and information herein are subject to change without notice. (4) (3) 0510 160 120 140 100 60 80 40 15 20 30 40 35 45 25 (2) (1) it09141 1.0 2 1000 2 3 3 5 2 5 7 357 10 23 57 7 id01104 it06977 it06978 0.01 23 7 7 0.1 0 52 23 37 1.0 0.001 0.01 0.1 1.0 10 5 160 80 60 100 120 140 20 40 2 2 3 5 37 2 5 37 2 5 37 2 5 37 5 3 2 5 7 1.0 rth(j-c) -- t transient thermal resistance, rth(j-c) -- c / w time, t -- s i sfm -- t surge forward current, i fsm (peak) -- a time, t -- s i s 20ms t c -- v r interterminal capacitance, c -- pf reverse voltage, v r -- v f=100khz current waveform 50hz sine wave tc -- i o case temperature, tc -- c average output current, i o -- a (1)rectangular wav e q =60 (2)rectangular wav e q =120 (3)rectangular wav e q =180 (4)sine wav e q =180 q 360 rectangular wave 180 360 sine wave
|
